For capillary

electrophoresis (CE), the basic anion buffer (Part No.: 5064-8209) used for sugar and Dabrafenib chemical structure organic acid analysis was purchased from Agilent (Santa Clara, CA). Glucose, fructose, and citric acid were purchased from Sigma–Aldrich Co. Ltd. and sucrose and malic acid from Fluka (Poole, UK). For solid-phase extraction (SPE), HPLC-grade methanol was purchased from Merck Ltd. (Poole, UK) and methyl acetate, sodium sulphate and HPLC grade water from Fisher Scientific (Loughborough, UK). 3-Chlorophenol and the alkane standard C7–C30 (1000 μg/ml) in hexane were purchased from Sigma–Aldrich Co. Ltd. (Gillingham, UK). For dynamic headspace extraction (DHE), compounds used as standards were SNS-032 supplier obtained from Sigma–Aldrich Co. Ltd. 1,2-dichlorobenzene in methanol (130.6 μg/ml) and the alkane standards C6–C25 (100 μg/ml) in diethyl ether. The EZ-Faast amino acid analysis kit (Phenomenex, Torrance, CA) was used for the analysis of amino acids by GC–MS. Norvaline was obtained from Sigma–Aldrich Co. Ltd. One melon from each point (maturity, genotype) was rinsed in cold running tap water, the skin (0.8 cm) and the seeds were removed and the remaining fruit was chopped and blended in a food processor.

Portions of 200 g were weighed into polypropylene centrifuge bottles (250 ml; Nalge Nunc International, Rochester, NY) and the bottles were centrifuged at 21,859g for 20 min at 4 °C in a RC-6C Plus Sorvall R centrifuge (Thermo Scientific, P-type ATPase Waltham, MA). For chemical analysis,

the supernatant juice was filtered under vacuum using a Whatman filter No. 1 (GE Healthcare UK Ltd., Buckinghamshire, UK), in order to remove any tissue particles, and the filtrate was used for all the analyses. Three replicate fruits were prepared for each point. Portions of the 12 melon extracts were used immediately for sensory and volatile analysis, while the remainder was stored at −20 °C prior to semi-volatile and non-volatile analyses. Melon juice (2 ml) obtained as described above, was transferred to a 250-ml conical flask with a screw-thread neck and 10 ml of water were added. The flask was then placed in the water bath at 37 °C, and a flow of nitrogen swept the volatiles for 1 h at 40 ml/min onto a glass-lined, stainless steel trap (105 × 3 mm i.d.) containing 85 mg of Tenax TA (Scientific Glass Engineering Ltd, Ringwood, Australia). Internal standard (1 μl of 130.6 μg/ml 1,2-dichlorobenzene in methanol) was added to the trap at the end of the collection, and excess solvent and any water retained on the trap were removed by purging the trap with nitrogen at 100 ml/min for 10 min. Traps were thermally desorbed in a CHIS injection port (Scientific Glass Engineering Ltd) attached to a HP5890/5972 GC–MS (Agilent) as described by Elmore, Parker, Halford, Muttucumaru, and Mottram (2008).